English
Product Introduction：
The nylon melt blown filter element is made of melt blown ultrafine nylon fibers as the substrate, using hot melt winding technology. There is no chemical adhesive added throughout the process, fundamentally eliminating the risk of fiber detachment and dissolution. It has excellent high temperature resistance (up to 120 ℃) and extensive chemical resistance, especially suitable for organic solvents such as hydrocarbons and aromatic compounds, as well as high-temperature liquid filtration fields. Optional center pole support is available to improve compressive strength, and various forms of hot melt bonding joints are provided to meet various installation needs.
Application fields:
◎ Pharmaceutical industry sterilization/fine filtration
◎ Purification of food and beverage production line
◎ Preparation of Microelectronics Ultra Pure Water
◎ Advanced treatment of drinking water
◎ Chemical solvent and raw material liquid filtration
◎ Security filtration of reverse osmosis (RO) system
Product Features:
◎ Ultra fine nylon fiber material
◎ Wide precision coverage
◎ Gradient deep filtration
◎ Excellent high temperature resistance
◎ Excellent chemical resistance
High cleanliness
Technical Indicators:
Technical specifications for inner diameter: 20mm, 25mm, 28mm, 30mm in the middle
Outer diameter: 62mm, 63mm, 65mm, and 115mm in diameter
Length: 5 ", 10", 20 ", 30", 40 ", 50", 60 "
Filtration efficiency:>90%
Accuracy: 1.0 μ m 3.0 μ m 5.0 μ m 10 μ m 25 μ m 50 μ m 75 μ m 100 μ m
Component Material Filter Material: Nylon Fiber
End cap: Polypropylene
Center pole: Glass reinforced polypropylene/nylon (optional)
Gasket/sealing ring: silicone rubber, ethylene propylene rubber, nitrile rubber, fluororubber, polyethylene
Technical Performance Maximum Operating Temperature: 120 ℃ Polyethylene Gasket Maximum 60 ° C
Fiberglass polypropylene center pole with a maximum angle of 82 °
Maximum working pressure difference: 2.5Bar, 25 ℃ (1-25 μ m)
1.0 Bar 25 ℃ (without center rod) (1-100 μ m)
